| Scale 1:5 |
| 1, Displacement 30.5cc, single cylinder, two stroke, air-cooled |
| 2, Torque :3.7N.M/10000rpm |
| 3, Power:3.8K.W/10000rpm |
| 4, LxWxH:970x440x340mm |
| 5, Tread:395mm(F)/400mm® |
| 6, Wheelbase(F/R):570mm |
| 7, Rear wheel drive |
| 8, Rear disc. Brake |
| 9, 15KG full metal gear throttle servo |
| 10, 40KG metal gear steering servo |
| 11, Upgraded dominator exhaust pipe |
| 12, CNC alloy diff. gear set |
| 13, 5T knobby tyres sets ( with CNC alloy hub) |
| 14, 6mm absorber |
| 15, 6V4500µA battery |
| 16, Renewable 9mm shaft |
| 17, 2.4G 3 channel controller with LCD screen |
| 18, Normal tools repair bag |
| 19, Front & rear lean prevention nylon set |
| 20, oil bag:shocker oil, diff.gear oil, air filter oil |
| 21, lama tools bag and tools bag for engine backout |
| 22, Imported air filter foam( red or yellow color for your choice) |
| 23, 1 pc petrol funnel |
| 24, CNC rear absorber brace bar |
| 25, CNC alloy clutch tripod |
| 26, CNC F&R Wheel hub carrier |
| 27, CNC alloy F&R "A" arm set |
| 28, CNC alloy F&R thicker board |
| 29, CNC alloy "U" rear brace |
| 30, CNC alloy fuel can cap |
| 31, CNC alloy rear absorber brace and drag link set |
| 32, CNC alloy air filter |
| 33, Chrome engine parts set |
| 34, Clutch spring for 8000r/min |
| 35, CNC alloy ball connector |
| 36, New throttle linkage set |
| 37, Walbro 668 carburetor |
| 38, NGK-CMR7H spark plug |
| 39, CNC F&R hydraulic shock cavity |
| 40, CNC alloy F&R bumper |
| 41, CNC alloy pull starter |
| 42, CNC alloy gear cover set |
| 43, CNC alloy wave case |
| 44, Other high strength nylon parts |
