Newsky Hy400w/600w/100w Wind Turbine With 5 Bla

Customs fees, taxes, duties are the buyers responsibility.

Horizontal HY-400WL, 600WL, 1000WL (5blades) Residential Wind Turbine

Feature of 400w, 600w and 1000w 5 blades wind turbine

*High Efficiency

*Light breezer start up

*Free of maintenance

*Light weight

*Easy intallation

*Heavy wind self-protection

*Minimal vibration & Low noise

*Damp-proof & sand-proof

*Long lifespan over 15 years

Parameter of 400w, 600w and 1000w wind turbine

Type	HY-400WL	HY-600WL	HY-1000WL
Rated Output	400W	600W	1000W
Peak Output	500W	750W	1200W
Rated Voltage(V)	DC12/24	DC24/48	DC24/48
Start-up Speed	2m/s	2m/s	2.5m/s
Cut-in Speed	2.5m/s	2.5m/s	3m/s
Rotor Diameter(m)	1.55	1.75	1.96
Swept Area (m2)	1.89	2.4	3
Rated Charging Current (A)	33.3/16.7	25/12.5	41.7/20.8
KWH/month (monthly avg. V=5.5m/s)	82	91	175
Net Weight	22KG	25KG	28KG
Quantity Of Blades	5
Rated Rotor Speed (RPM)	750
Rated Wind speed(m/s)	12m/s
System Average Cp.	more than 0.36
Working Temp. range °C	from -40°C to 60°C
Survival Max. Wind	50m/s or 110mph
Over-speed Control	Electromagnetic & blade aerodynamic braking
Blade Material	Reinforced nylon glass-fiber
Generator Type	Brushless 3-phase with permanent Neodymium Magnet
Generator Material	Aluminum alloy body & precision stainless steel rotor
Noise Level	less than 20dB (5m behind turbine @ 5m/s gusting)
Tower Connection	Flange connection
Lifespan(years)	15
Warranty (years)	3
Years On Market	7

Why we can be your wind turbine supplier?

The reassn can be found as belows:

1*BLADES:

HY400W/600W/1KW

Blades are made from reinforced nylon glass-fiber by using advanced thermoplastic engineering and precision injection molding technology for higher strength, flexibility and reliability.

2*Generator Housing:

HY400W/600W/1KW

made from high-quality rare earth permanent magnets material. The wind turbine is of small size, light weight and high-efficiency power generation.

3*Rotor and housing

Patented rotor is made of high quality

stainless steel rotor shaft attached with permanent neodymium magnet, the unique winding and multi pole design reduces the start-up torque of alternator which assures generator would produce more power at lower wind condition than other system.

4*Innovative slip ring design

HY400W/600W/1KW

HY Series Wind turbines with typical slip ring design often twists and

tangles the connection cable from generator to controller, which made the system has to be maintained every few month. HY Energy patented slip ring design solved this problem completely and made HY wind turbine with higher reliability and real maintenance free.

5*Maintenance Free Design

Innovative two-moving-part system

Typical wind turbine has three moving parts(rotor, head yawing and mechanical furling).HY Energy replaced mechanical furling by using advanced electromagnetic and blade aerodynamics braking and take only two moving parts, which improves generator reliability dramatically as it has less mechnical failure.

6*Structure

7.Factory show

8.Recommend using draft:

9*Certifications:

10*The wind turbine project show:

11.How to install:

12* How to Set:

There are two basic requirements for a good site: high average wind speed and low wind turbulence.

1.The higher average wind speed, the more power will HY series wind turbine generates.

The wind power is proportional to the cube of wind speed. For instance, the energy contains in the wind speed of 5m/s is approximately as 2 times higher than wind speed of 4m/s.

2. It will against the long term operation of the wind turbine if the sitting locatioin in an unstable wind-flow region or in a serious turbulent-flow region. Moreover, this serious turbulent flow not only causes destructive force to the wind turbine, but also dramatically reduces power generation of the wind turbine.

Install the wind turbine as high as possible. Since the higher location, the greater wind speed it will be the more stable wind blow, the more stable power can be generated.

In flat area, the recommended installation heigh for the HY series is not less than 8 m above ground level.

Bushes and buildings can be assumed as barriers to the wind flow, before and behind these barriers, it could form a sluggish and disorder turbulent flow area in which the wind turbine couldn't generated stable power output. It should be avoided to install the wind turbine in the turbulent flow area. The highest of tower should be 2 meters higher than the highest building within 100 m radius.

Furthermore, plesse obey related local legalization and regulation.

13* Which kind of inverter and battery is fit to you?:

Inverter: for customer who need AC electricity. It is recommended to configure 200V(or 110V)50Hz or (60Hz) controller/inverter.

Battery:

Two pcs 150Ah/12V batteries are recommended for HY400W wind turbine.

Two pcs 200Ah/12V batteries are recommended for HY600W wind turbine.

Four pcs 200Ah/12V batteries are recommended for HY1000W wind turbine. Negative pole of battery should be connected to the ground perfectly.

You can call us at any time if there is any questions on our productions.

If you want to know more information, pls contact us without hesitates.