|10 (metric ton)
|Minimum Order :
|Product Status :
|Sample Available :
|Shipment Terms :
|Payment Mode :
|Metallurgy, Mineral & Energy, Anticorrosive Material
|Posted By :
ALUMINUM FOIL TAPE, FLASHING TAPE, PEEL/STICK ROOF TAPE, has a heavy aluminum facing together with an extra thick rubberized asphalt based adhesive system. The aluminum facing is embossed to provide flexibilty for wrapping irregular shapes and surfaces.
The Xunda-T 700 series is recommended for most types of roofs, windows and flashing problems including:
The specification of the tape consists of three layers,
Adhesive: Fexible modified bitumen adhesive compound.
Film backing: Aluminium foil
Interleaf: Antiadhesive Film Treated with Silicone
APPLICATION: The surfaces to be sealed must be clean, dry and free of loose rust, scale, dust, talc and dirt. All oil, grease, silicone or other contaminates should be first removed with a suitable solvent/cleaner.
For older roofs use a stiff brush to remove all loose granules and surface elements.
Porous surfaces should be primed with a common asphalt based primer and allowed to dry before Xunda-T 700 is applied.
Install Xunda-T 700 by gradually peeling away the plastic release liner while rubbing the Xunda-T 700 to the surface.
Hint: prevent bubbles under the product by using your hand to squeegee out air by wiping your hand towards the roll as you set the tape to the surface.
Overlap seams or sealing are of application by 3 inches.